2007-2018 Wspornik przedniego drążka kierowniczego Jeep Weld-On HD (8012-13)

Opis

Pasuje

?

Synergy HD Weld-On Front Track Bar Bracket For 2.5″ Axle Tube raises your Jeeps suspension roll by 3″, by doing this these brackets also reduce body roll & improve overall handling, strength & reliability.

Numer części:?8012-13

Cechy

• Compatible with all lift heights, bracket can be trimmed for track bar bracket heights from stock, +3″ over stock height
• Weld on design for strength and reliability
• This bracket raises the vehicles suspension roll center by 3″
• Bracket moves track bar closer to the axle centerline to clear aftermarket highsteer knuckles/tie rod at full steering lock
• Raising the roll center reduces vehicle body roll and dramatically improves overall handling
• Weld on tab included for mounting factory or aftermarket steering stabilizer up and out of harms way
• Weld on tabs for steering assist rams included
• Weld on sway bar relocation tab included
• Laser cut from 3/16″ steel

Instalacja

• Kliknij tutaj

Uwagi

• Requires the use of a minimum 3″ bump stop spacer

Filmy