2008-2010 Powerstroke 6″ 4 Link Lift Kit (BDS560H)

Descrizione

Fare clic qui per personalizzare questo kit

Adatti

?

Your 6.4 is a Powerhouse that can eat up miles like no other! Match the power of the beast under the hood by lifting your truck with a 4-Link conversion 6″ lift kit. Designed to make sure you don’t lose any control while you increase the stance,?this also will reduce caster change through wheel travel maintaining controllability on & off-road.??

Numero di parte:?BDS560H

Caratteristiche

• 6″ ProRide Coil Springs
• Stabilizzatore di sterzo
• Staffe di fissaggio della barra antistradale
• Braccio del Pitman forgiato
• Staffa per il riposizionamento della barra di controllo
• Ammortizzatori serie NX2
• 5″ Rear Block Kit
• Clears 37’s
• OE Driveability

Combinazioni di pneumatici e ruote:

• 37″ x 13,50″ con 17 x 9 e 4,5″.
• 37″ x 13,50″ con 18 x 9 e 4,5″.
• 37″ x 13,50″ c/ 20 x 9 e 4,5″

Note

• Removal of the factory block is required.
• Installation of the rear block kit will result in a “pre-runner” look with the rear of the vehicle 2″ lower than the front. To get a level stance you must upgrade to the rear leaf spring option.
• These trucks were manufactured with and without top-mounted overload springs on the rear leaf springs. A top-mounted overload is an extra leaf separate from the pack that is set above the main leaf. You will need to identify which you have before ordering.
• If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.
• Sebbene sia estremamente raro, possono verificarsi vibrazioni della trasmissione anteriore.
• Front exhaust modification may be required to clear the front driveshaft on gas models.
• I bulloni a U non sono adatti ai modelli duali.
• Dropped pitman arm will not fit 10 lug wide track F350 models.

Installazione

• Fare clic qui per le istruzioni di installazione
• Difficoltà: 3 (dove 1 = più facile e 5 = complicato)