Description
Convient : Universel
The Cool Down Timer is designed to keep the engine running when the ignition is turned off to prevent turbocharger bearing failure that could occur when the engine is shut down, stopping the cool lubricating oil flowing to the turbocharger while it is still hot. If the oil flow is shut off too early, the remaining oil in the bearing housing will overheat causing coking of the bearings which causes both premature bearing wear and reduced oiling of the bearings. Allowing the engine to idle to a minimum operating speed gives the turbocharger time to cool down. The CDT is adjustable for up to 5 minutes of idle time or optionally works with any K-Type EGT probe for temperature-based shutdown.
Numéro de pièce: ?1081160
Caractéristiques
- Prevent turbo damage during hot engine shutdown
- EGT, time and manual controlled shutdown
- Works with any K-Type EGT probe
- Compatible with most OEM vehicle security alarms
- Dodge 1994-2005 5.9L Cummins
- Ford 1994-2018 PowerStroke 7.3L/6.0L/6.4L/6.7L (w/o Push Button Start)
- Chevy 2001-2014 Duramax 6.6L
Notes
- Not compatible with push button start on Ford vehicles
Installation
- 3 Hours
- Cliquez ici
Garantie
Pièces seulement
- 12 mois
- 24 000 miles
Français 
English 
Italiano 
Deutsch 
Español 
Polski