Description
Convient :
| APPLICATIONS | OEM Projectors from vehicles listed below |
| LEXUS | RX330, ES350 (Non AFS models) |
| HYUNDAI | Genesis Coupe (1st gen) |
| MAZDA | 2, 3, 6, CX-5, CX-7, CX-9, MX-5 Miata, RX8 |
| NISSAN | 10+ Altima Coupe/Sedan, 09+ Maxima |
| SCION | xB, xD, tC, iQ, FR-S |
| SUBARU | 10-14 Legacy, Outback |
| TOYOTA | 07-09 Camry, 07-09 4Runner, 07-09 Solara |
| OTHER | All 2.5″ Projectors w/ 24mm Focus |
Using the JDM Subaru STi projector lens as our performance benchmark for 3″ Koito Bi-xenon Projectors, we were able to bring that hard-to-find performance to the masses with Morimoto 100% optically clear STi-R lenses.
Adding the STi-R Clear Lens to your OEM headlights or projector retrofit with OEM projectors should be a “no-brainer”. Not only are they an inexpensive upgrade, but these Morimoto projector lenses allow the projectors to perform to their maximum potential in every aspect.
Numéro de pièce :?LS30
Caractéristiques
| DIAMÈTRE | 73.5mm |
| FOCUS HEIGHT | 27mm |
| CLARITY | 100% Clear Morimoto Kuria Optics |
Ce qui est inclus
| LENSES | 1x Sti-R |
| GARANTIE | Lifetime |
?
Notes
- The diameter AND focus height of the lens are both very important
- It is very common for many modern Toyota, Lexus, Scion, Subaru, Nissan, and Mazda vehicles with 2.5″ factory projectors to come with the projector that’s compatible with the STi-R Clear Lens. (H7, H11, D2S, and D4S are all common bulb sizes in these projectors)
Installation
Park car, mark stock beam-height on wall, disassemble fog light, cut original reflector to fit projector in place, re-mount modified fog lights without lens cover, illuminate projector, then tack it into place using the reference height/level using epoxy gum. Check out the installation procedure linked above.
Français 
English 
Italiano 
Deutsch 
Español 
Polski