2020-2021 Powerstroke 4″ 4-Link Coilover Suspension Lift – Fox/Non DSC (BDS1567F)

Descripción

Haga clic aquí para personalizar este Kit

Se adapta a

?

Take your new Super Duty to the next level with the tried and true BDS 4-link conversion system. A big upgrade from the factory-stamped steel radius arms, these high-strength 4-link conversions offer improved handling, stability, strength, and caster control during wheel travel. Full-length 4″ ProRide diesel-specific coil springs are used for the additional ride height paired with?Fox 2.0 Series shocks for a smooth ride on any terrain and all-around impressive performance.

Número de pieza:?BDS1567F

Características

• Fox 2.5 Coil-Overs
• FOX 2.0 IFP performance gas shocks
• Reubicación de la barra de dirección
• Traditional frame-mounted design to center the axle and put track bar angle in phase with the drag link
• Drop Pitman Arm
• Relocates drag link by flipping tie rod position from top-down to bottom-up while also dropping the mount position
• Replacement Single Steering Stabilizer
• Includes mounting kit, a required component since the drag link is now flipped causing the factory stabilizer mount taper to face the wrong direction
• Front Sway Bar Relocation
• Frame-mounted brackets to properly reposition the sway bar
• Front Bump Stop Extensions
• Front Brake Line Drop Brackets
• Relocates lines for proper slack while minimizing the amount the lines need to be reformed Full Replacement
• HD Radius Arms
• Same design as used in the 11-16 model 2.5″ lift systems. Repositions axle and sets caster properly for 4″ of lift.
• Rear 4.5″ block
• Levels stance with front includes integrated bump stop wing
• Allow for clearance of up to 37″ tires

Combinaciones de neumáticos y ruedas:

• 37 x 12.50 w/ 17 x 9 and 4.5″ – 5″
• 37 x 12.50 w/ 18 x 9 and 4.5″ – 5″
• 37 x 12.50 w/ 20 x 9 and 4.5″ – 5″

Notas

• Diesel Model Only
• If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
• 37 x 12.50 tires may require minor trimming.
• Some models may be factory equipped with a 2-leaf main rear leaf spring pack and others a 3-leaf main. Be sure to order the correct option when customizing your kit.
• If your truck is equipped with a factory rear sway bar add: 123005
• Due to taller factory ride height, Tremor models will not net the full advertised lift height. Final ride height will be the same as standard models.
• If installed on a truck with a top-mounted overload spring, with an overload spacer block taller than 1-1/8″ UBT4027 (Qty: 4) is required)

Instalación

• Haga clic aquí para ver las instrucciones de instalación
• Dificultad: 4 (donde 1 = más fácil y 5 = complicado)