Descripción
Se adapta a
| BOMBILLAS HID | All D1S or D3S |
| VEHICLES | All with 9-18V electrical systems |
Designed to last for 2500 hours and we’re confident they will. The powerful AS15-G4 IC chip recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct. The software is proprietary to this ballast alone.
Since the igniter cord can be unplugged from the HID ballast computer, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.
Número de pieza:?BL23
Características
- Stainless Steel Hardware
- TechFlex braided insulation
- Low voltage reduces?radio interference
- Consumes significantly less current
- Slim 18mm body
- AMP Super seal 3 pin connector
- Die-cast aluminum shell houses a 100% potted circuit board
Información adicional
| OUTPUT WATTAGE | 35W or 50W +/- 2% |
| OUTPUT CURRENT | 85 V CA |
| IGNITION VOLTAGE | 23KV |
| TENSIÓN DE ENTRADA | 9-18V DC |
| INPUT CURRENT | 5A @ Startup |
| OPEN CIRCUIT | Protected (< 1s) |
| SHORT CIRCUIT | Protected (< 1s) |
| CLIMATE RANGE | -40C to +85C |
| ESPERANZA DE VIDA | 2500hours (5-7 years) |
Qué incluye
| BALLASTS | 1x Morimoto XB 2.0 Computers |
| OUTPUTS | 1x Morimoto XB D1/D3 Compatible |
| GARANTÍA | 2 años |
Español 
English 
Italiano 
Deutsch 
Français 
Polski