1990-2003 Powerstroke E40D/4R100 Getriebegehäuse (F4R100)

Beschreibung

Passt zu

Für alle MAG-HYTEC Produkte gilt eine lebenslange Garantie für den Erstbesitzer auf Teile- und Verarbeitungsfehler.

The Mag-Hytec transmission pan is built from high-quality aircraft aluminum and includes black powder coating. The bolts are zinc plated Allen head w/ stainless steel washers. Built to much higher standards than your OEM pan, it will increase your fluid levels by 7.6 Quarts. With this extra added fluid capacity, you can expect to see lower transmission operating temperatures and prolonged oil life!

Teil Nummer: F4R100

Eigenschaften

• Deep Sump – Increased Fluid Capacity by 7.6 Quarts
• Prolongs the life of your oil!
• Lower Transmission temperatures
• Pre-Drilled & Tapped 1/8″ NPT Sender Port
• O-Ring Seal eliminates the need for gaskets or sealant
• Magnetic Drain Plug

Anmerkungen

(Applicable To Excursion Owners Only):  

• This application will require some modifications of the transmission cross member. There are many different ideas and each will have its merits and difficulties.
• Mag-Hytec’s suggestion would be to slot the bolt holes on the cross member which allows it to move toward the rear of the truck for clearance. (NOT THE FRAME, but the cross member) The #F4R100 pan will bolt onto the transmission and then you will see how long you will need to make the slots.
• Some others have cut a relief in the cross member (Not their favorite idea.) Also, some have ground the fins down on the pans and cut the cross member, this is not the worst idea but again whatever will work should be looked at.
• This will be a project requiring tools and skills that are advanced.

Einrichtung

• Für Installationsanweisungen, Bitte hier klicken