Beschreibung
Passt zu
| MORIMOTO-PROJEKTOREN | Alle außer Matchbox |
| OEM-PROJEKTOREN | Die meisten außer TL, LS430, LS460, Q45 |
| LENS DIAMETER | 2,5″ und 3″ Kompatibel |
The Mini Turbine is going to suck you in with it’s twisted design that’s inspired by the vanes of a turbo. This shroud provides plenty of coverage for all Mini H1 projectors but also allows some light to shine through it’s walls. If subtle and clean is your thing, you might want to consider another shroud because the Turbine is turbocharged with a twisted look!?
Four internal posts line up to the bolt pattern on the mid-section of any generation Morimoto Mini H1 projector, so they’ll bolt right up!?LED Halos are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking.
Teil Nummer: S330
Eigenschaften
| DIAMETER | 118mm |
| TIEFEN | 56mm |
| GRÖSSE DES VORDEREN LICHTHOFS | 70mm |
| VENT HALO SIZE | 100mm |
| ENDE | Forever Finish Chrom |
Was ist inbegriffen?
| SHROUDS | 1x Mini Turbine |
| LED-HALOS | Optional |
| GARANTIE | 5 Jahre |
?
Anmerkungen
- Dremel-Handwerkzeug mit EZ Lock-Schneidrädern empfohlen
- Das Trimmen von Wanten ist eine häufige Aufgabe bei der Nachrüstung
Deutsch 
English 
Italiano 
Français 
Español 
Polski